Begin with the tire size and fitment approved by the ATV or UTV manufacturer. In a size such as 25×10-12, the numbers generally describe approximate overall diameter, section width, and wheel diameter, but use the tire maker’s data and vehicle manual for exact dimensions and approved combinations. Front and rear sizes often differ; do not order a four-tire set from one size field without checking both axles.
GARVEE listings include a 23×7-10 front-style knobby tire listing, 23×10.5-14 all-terrain tires, and 25×10-12 six-ply-rated tubeless tires. Each must be checked against wheel, position, load, clearance, and vehicle guidance.
| Terrain emphasis | Typical tread priority | Tradeoff to check |
|---|---|---|
| Hard trail/mixed | Stable center contact and moderate voids | Mud clearing versus ride and wear |
| Mud/soft soil | Deeper, open lugs and self-cleaning space | Vibration and behavior on hard surfaces |
| Sand | Flotation and terrain-specific pattern | Steering response and directional fit |
| Sport/race | Predictable cornering and position-specific design | Wear, load, and terrain range |
Use the cold inflation pressure specified for the vehicle and approved tire setup, not the maximum molded on a tire as a target. Check pressure with an accurate low-pressure gauge, inspect tread and sidewalls for cuts, punctures, bulges, cracking, or bead damage, and replace or service tires according to the vehicle and tire guidance. Mounting should be completed with correct equipment and procedures.
It generally identifies approximate tire diameter, width, and wheel diameter. Confirm the manufacturer’s actual dimensions and the vehicle-approved size before ordering.
Only if the vehicle manufacturer approves that setup. Many ATVs and UTVs use different front and rear widths or sizes.
It is a ply-rating or strength-class designation, not necessarily six physical fabric plies. Use the tire’s load data and vehicle requirements.
Follow the tire, wheel, and vehicle manufacturers. Bead design, wheel condition, valve, heat, and application affect compatibility.
Use the vehicle manufacturer’s specified cold pressure for the approved tire setup. The pressure molded on the tire may be a maximum associated with load, not the operating target.
No. Terrain, direction, compound, spacing, vehicle power, pressure, and rider technique matter. Deep mud lugs can trade smoothness and predictability on hard ground.













Garvee Set of 2 AT26x9-12 ATV UTV Off-Road Tires 26x9-12 6-Ply Durable Tubeless All-Terrain Wide Footprint for Trail Riding

Garvee Set of 2 ATV Tires All-Terrain 19X7-8 4PR Tubeless Nylon 4-Ply Durable Off-Road Traction for Trail Sand Mud

Garvee Set of 2 UTV ATV all-terrain Tires 27x11x12 8PR Radial Construction Non-Directional Tread PatternI - Pair of 2 UTV Tires for 12 inch Rims (AT27x11R12-8PR)

Garvee 22x10-10 ATV Tires, 4PR All Terrain Tubeless, Pack of 2, for ATV UTV Trail Sand Mud Off-Road

Garvee Set of 2 ATV Trail Tires 6PR Knobby Sport Tires, Tubeless - AT27x10-12-6PR TL KNIGHT

Garvee Set of 2 ATV Trail Tires 6PR Knobby Sport Tires, Tubeless - AT26x11-14-6PR TL KNIGHT

Garvee Set of 2 ATV Trail Tires 6PR Knobby Sport Tires, Tubeless - AT28X10-12-6PR TL KNIGHT

Garvee Set of 2 ATV Trail Tires 6PR Knobby Sport Tires, Tubeless - AT26x12-12-6PR TL KNIGHT

Garvee Atv Tires, AT27x11-12-6PR TL MARS Compatible with

Garvee Set of 2 ATV Trail Tires 6PR Knobby Sport Tires, Tubeless - AT23x8-11-6PR TL KNIGHT

Garvee AT20x10-9-6PR TL EOS Garvee Atv Tires, AT20x10-9-6PR Compatible for

Garvee 23x7-10 ATV Tire 4PR TL, All Terrain Tire for 10x5.5 Rim, 22.5" OD 7" Sidewall, Max Load 235lbs, Fits LCI/SI 30F, Durable Off-Road Quad UTV Tire, Black

Garvee AT30x10R14 8PR TL UTV/ATV All Terrain Tires, 310lbs Max Load

Garvee ATV 25x10-12 6PR QD137 All Terrain ATV Tires, Front 25x10-12, 6PR, 205/65-12, 25" 25x10x12 UTV Tire, Set Of 2