NEW
Garvee 10 x 20 FT Carport Replacement Cover Kit, 200G PE Tarp with Front & Rear Zipper Doors, 2 Roll-Up Side Openings and 4 Mesh Windows, Gray, Frame Not Included
| Product Type | Carport Replacement Cover and Sidewall Kit |
| Compatible Shelter Size | 10 x 20 ft |
| Compatible Peak Height | Up to 11 ft |
| Approximate Coverage Area | 200 sq ft |
| Fabric Material | Polyethylene (PE) |
| Fabric Weight | 200G |
| Color | Gray |
| Front Entrance | Roll-Up Zippered Door |
| Rear Entrance | Roll-Up Zippered Door |
| Side Openings | 2 Roll-Up Zippered Openings |
| Windows | 4 Adjustable Mesh Windows |
| Water Resistance | Water Resistant |
| UV Protection | Yes |
| Product Weight | 15.87 lb |
| Package Dimensions | 20.87 x 12.99 x 10.63 in |
| Recommended Uses | Vehicle Storage, Boat Storage, Equipment Protection, and Temporary Outdoor Workspace |
| Metal Frame Included | No |
| Anchors and Weights Included | Not Stated |
| Installation Required | Yes |
Garvee 10 x 20 FT Carport Replacement Cover Kit, 200G PE Tarp with Front & Rear Zipper Doors, 2 Roll-Up Side Openings and 4 Mesh Windows, Gray, Frame Not Included
200G PE Replacement Cover Kit with Multiple Doors and Ventilation
Renew the coverage of a compatible 10 x 20 FT carport with a gray water-resistant PE tarp featuring front and rear zipper doors, two side openings and four adjustable mesh windows.
This product is intended for a compatible existing carport structure. The metal frame, support poles, structural connectors, anchors, sandbags and complete portable garage are not included unless specifically stated in the package contents.
Flexible Coverage for Vehicles and Outdoor Equipment
The reinforced PE material and multiple access points help restore practical protection and usability to an existing portable shelter.
Heavy-Duty PE Fabric
Reinforced polyethylene material provides practical coverage from sun, light rain, dust and falling outdoor debris.
Front and Rear Doors
Zippered entrances at both ends allow convenient drive-through access and flexible equipment loading.
Two Side Openings
Roll-up side doors provide additional access without requiring the front or rear entrance to be opened.
Adjustable Mesh Windows
Four windows support airflow and visibility while helping reduce contact with flying insects.
UV-Resistant Material
The outdoor fabric helps reduce damage and fading caused by regular sunlight exposure.
Neutral Gray Finish
The gray exterior coordinates with residential yards, workshops, farms and outdoor storage areas.
Multiple Openings for Easier Access and Airflow
Choose the entrance that best suits vehicle parking, equipment loading, ventilation or routine access to stored belongings.
Zippered Entrance
Roll up the main door for vehicle entry and daily garage access.
Second Zippered Door
Provides an additional access point for drive-through configurations.
Roll-Up Openings
Reach tools or equipment without opening either end of the shelter.
Adjustable Ventilation
Open or close the mesh windows according to airflow and weather needs.
200G PE Material for Everyday Outdoor Storage
The reinforced cover provides a practical barrier between stored vehicles or equipment and common outdoor exposure.
- Water-resistant surface helps shed passing rain
- UV-resistant material helps reduce sun damage
- Provides coverage from dust, leaves and outdoor debris
- Fade-resistant gray finish supports seasonal use
- Cover should remain properly tensioned and securely attached
Four Mesh Windows Help Reduce Heat and Stale Air
Adjustable window covers allow you to balance enclosed storage with increased airflow and natural visibility.
- Open the windows to increase cross ventilation
- Mesh allows airflow while helping reduce insect entry
- Window openings improve natural interior visibility
- Close the outer covers during rain or storage
- Do not operate engines in a fully enclosed shelter
Measure Your Existing Frame Before Ordering
Portable garage frames with the same nominal size may use different roof profiles, pole spacing, door heights and attachment locations.
Confirm Frame Size
Verify the length and width of the existing carport structure.
Check Peak Height
Measure the center roof height and sidewall height before purchase.
Inspect Attachments
Compare zipper positions, windows and fastening points with your frame.
Designed for a Secure, Tensioned Fit
Proper attachment around the roof, sidewalls and lower frame helps reduce loose fabric movement during outdoor use.
- Align the cover evenly before tightening attachment points
- Use compatible bottom bars and top support cables when required
- Avoid excessive tension around doors and zipper seams
- Add suitable anchors or weights to stabilize the complete structure
- Inspect fasteners regularly during seasonal use
Four Steps for Replacement Installation
Installation is easier with two or more adults and an existing frame that has been measured and checked for compatibility.
Inspect the Frame
Repair sharp edges, loose connectors or damaged poles before adding the cover.
Position the Roof
Center the PE tarp over the frame before securing the front and rear ends.
Attach the Sidewalls
Align all doors and windows, then fasten the fabric with even tension.
Anchor the Shelter
Secure the complete frame with suitable anchors, weights or sandbags.
Flexible Coverage for Outdoor Storage Needs
Restore an existing portable structure for vehicles, recreational equipment, tools and temporary project space.
Product Specifications
Essential material and compatibility details for purchase planning.
| Product Type | Carport Replacement Cover and Sidewall Kit |
|---|---|
| Compatible Shelter Size | 10 x 20 ft |
| Compatible Peak Height | Up to 11 ft |
| Approximate Coverage Area | 200 sq ft |
| Material | Polyethylene (PE) |
| Fabric Weight | 200G |
| Color | Gray |
| Front Entrance | Roll-Up Zippered Door |
| Rear Entrance | Roll-Up Zippered Door |
| Side Openings | 2 Roll-Up Zippered Openings |
| Windows | 4 Adjustable Mesh Windows |
| Water Resistance | Water Resistant |
| UV Protection | Yes |
| Product Weight | 15.87 lb |
| Package Dimensions | 20.87 x 12.99 x 10.63 in |
| Metal Frame Included | No |
| Installation | Required |
Compatibility and Weather Notice
Confirm the dimensions, roof profile and attachment points of your existing frame before ordering. This fabric kit does not include a structural metal frame. Properly anchor the complete shelter and remove the cover during severe winds, heavy snow, thunderstorms or other extreme weather. Do not allow snow or standing water to accumulate on the roof.
