Setup was a breeze, no tools, no plumber, no hassle. The included stainless steel T-valve and braided hose are sturdy, and the whole process took less than 10 minutes. Dual Nozzles: One for rear cleansing, one angled for feminine wash. Both pivot for full coverage and retract behind a protective shield when not in use. Self-Cleaning automatic pre-rinse cycle before and after each use keeps things hygienic. Adjustable Pressure & Position: The dial lets you fine-tune water flow from a gentle mist to a strong jet, and the nozzle slider helps target the spray exactly where you want it. The brass inlet and corrosion-resistant valves give confidence in long-term durability. It feels solid and leak-proof.

The installation of this took me all of ten minutes - including some time doing some additional cleaning. It was super easy to install, requires no power, and does what a bidet should. I was slightly concerned with the fit because the rings that they include have narrow slits where the seat mounting screws didn't quite fit my hardware. Thankfully the bidet and associated hardware is so thin that it didn't really matter.All in all an easy install and a great product.

This bidet attachment is perfect for personal hygiene and is simple to install, making it a suitable DIY project. As a beginner, I opted to hire a Handyman to ensure a hassle-free installation process. All necessary attachments, including the T valve and hose, were included with the product, and the water inlets are crafted from brass for enhanced durability. The sprayer offers different modes, including a self-clean mode, and allows for adjustable water pressure to suit individual preferences. Overall, it's a fantastic product that offers great functionality at a reasonable price point. Plus, it's entirely manual, requiring no electric connection

This bidet is great If you do not have an outlet accessible near your toilet for an electric bidet. Simply tap this into your water supply line and mount it to your toilet seat.It Sets up quite easily and just runs off of water pressure of your plumbing.The one downside is the water is the same temperature as your pipe water... So that can be a bit of a surprise when it's very cold out.I suppose if you wanted to you could run a blending valve and mix hot and cold water to be the ideal temperature, but that is above my pay grade

4-stars for the bidet attachment1-star for the t-valve adapterPro:Easy to installWorksBrass inlet valveIncludes 3/8" to 3/8" hoseCons:Uses a 3/8" inlet valve on attachmentIncluded T-valve doesn't workTo start off with the included t-valve didn't work. No matter what I did, it leaked, and yes, I put the cone washer in properly. Also, you should be super-careful with whatever valve you choose and how you install it because you don't want to strip the male threads coming out of the toilet tank. Otherwise, you'll have another repair project on your hands.I bought a different adapter which also included a shut-off valve for the bidet outlet. Note that the bidet's brass inlet is a 3/8" male and the hose supplied is 3/8" female to 3/8" female. After buying a different t-valve adapter, this bidet attachment worked great...but you need to factor in the added cost of a better adapter to see if this product is a good value.Price with new adapter aside, this is a good starter bidet. If the family likes using it, maybe I'll upgrade to a heated one for winter.

This was fairly easy to set up, but the instructions are lacking. They never mention the black gasket that was provided but I was able to figure out it goes into the end of the T-adapter, domed side out. I'm also not sure why the unit comes in two pieces that snap together. Seems unnecessary. Once it was set up, it worked well without any leaking. I have a pretty standard Crane toilet and it sits pretty flush under the seat. The only thing I don't like is how long the provided hose is. It sticks out from the toilet and I will have to find a way to keep it out of the way.

I haven't used a bidet before and this was an inexpensive, basic unit. I particularly liked how the jets retract when not in use, and even have a jet to clean them. Another concern I had was with the water feeling too cold, but in practice it's not uncomfortable.Installation was simple. Everything sealed right with no drips. The T connector fit well under the tank and the hose turned neatly out of the way.I put glass over the seat and both jets sprayed right at the center (didn't see much difference between the two jets). Due to the retraction mechanism you need to adjust pressure about half-way before it starts spraying. This still leaves some adjustability to water pressure.

You do not have to be a professional to put this together. I was able to do it all on my own and quickly too. This bidet honestly was the greatest thing I ever got. It functions properly with no issue and the pressure is amazing.

Easy to install, you just need to use a channellcok and a screwdriver depending on what type of screws are installed on your toilet seat (philips or regular straight), just make sure you tighten the threads straight and check that there are no leaks after you install them. it has 2 nozzles each sprays water on a different softness level and angle so you won't miss a spot lol, and it has a self cleaning functionality in case you need to clean the nozzles.The 2 rubber non-slip mats that come with the package (as you can see in the pic) really helps for the bidet not to slip and slide in time by use from its place.I give this product a 5 stars review.

I've used other bidets in the past so I was excited to buy this for my own home. The installation process was a little difficult because of our toilet being on the older side, but we managed and got it installed. Works great, nice flow, easy to use controls, and a sleek design.