NEW
Garvee Heavy Duty Multi-Tier Metal Welding Cart - 220 lbs Capacity Rolling Welder Trolley for MIG, TIG, MMA & Plasma Cutters with 360° Swivel Casters, Safety Chains, and Cable Hooks
| Technical Parameter | Official Specification |
|---|---|
| Brand Name | Garvee |
| Product Classification | Heavy Duty Multi-Tier Welding Cart Trolley |
| Maximum Load Capacity | 220 lbs (100 kg) |
| Total Product Length | 27.55 inches |
| Total Product Width | 11.81 inches |
| Total Main Structure Height | 28.54 inches |
| Lower Storage Deck Length | 17.24 inches |
| Gas Cylinder Deck Length | 10.15 inches |
| Mid-Tier Structural Height | 20 inches |
| Material Composition | Thickened High-Tensile Structural Sheet Steel |
| Surface Protective Coating | Anti-Spatter, Rustproof Industrial Powder Coating Finish |
| Tank Safety Hardware | Dual Stainless Steel Link Safety Chain Tie-Downs |
| Wheel Configuration | 4 Wheels (2x Front 360° Swivel Casters + 2x Fixed Rear Wheels) |
| Cable Storage Management | Integrated Dual Side-Mounted Lead & Torch Hanging Hooks |
| Color Finish Profile | Industrial Satin Black Finish |
| Product Net Weight | 44.97 lbs (20.4 kg) |
Garvee Heavy Duty Multi-Tier Metal Welding Cart - 220 lbs Capacity Rolling Welder Trolley for MIG, TIG, MMA & Plasma Cutters with 360° Swivel Casters, Safety Chains, and Cable Hooks
Garvee Heavy-Duty Multi-Tier Mobile Welding Cart (220 lbs Capacity)
Stop dragging heavy, unmanageable welding power supplies across your floor or struggling with tangled leads. The Garvee Heavy-Duty Multi-Tier Metal Welding Cart is an industrial-grade rolling workstation engineered specifically for MIG, TIG, MMA, and plasma cutting operations. Forged from high-grade alloy steel with a protective powder coat, this rugged trolley supports up to 220 lbs of gear. It features an ergonomic forward-slanted top deck for effortless machine control manipulation, a dedicated rear cylinder tray with dual safety chains, and integrated side lead hanger brackets. Backed by high-traction 360-degree swivel wheels, it provides total mobility for professionals and DIY garage fabricators alike.
Consolidate Your Complete Welding Setup into One Clean, Highly Mobile Workstation
Welding efficiently requires keeping track of an immense array of heavy, disorganized equipment—from power sources and gas shielding tanks to ground clamps, chipping hammers, and delicate torches. Storing these items loosely across separate workbenches creates tripping hazards and cuts into your actual arc-on fabrication time. The Garvee Mobile Welding Cart brings organization to your workspace. By keeping your inverter machine, secondary cutting tools, shielding cylinder, and all corresponding line cables neatly managed on a single high-strength platform, you can smoothly transition your entire setup to any vehicle or fabrication table in seconds.
Premium Engineering Features
🏋️ Reinforced 220 lbs Heavy-Duty Steel Construction
Built to endure the harsh, high-impact environments of active commercial fabrication yards and auto body shops. The thick, cold-rolled steel framing resists warping under heavy machinery payloads, while the resilient black powder-coated layer completely shields raw steel against flying weld spatter, grinding sparks, rust, and shop chemicals.
📐 Forward-Slanted Top Shelf for Quick Control Access
Maximize your viewing angles while wearing a shading hood. The top tier is purposely engineered with a ergonomic downward pitch, allowing you to instantly view digital screens, dial-in amperage values, or adjust wire feed speeds from a standing position without bending down or squinting.
⛓️ Dual Tank Safety Chains & Dedicated Cylinder Deck
Eliminate the danger of highly pressurized cylinder accidents. A dedicated 10.15-inch rear base platform keeps heavy argon, CO2, or oxygen shielding gas cylinders centered low to the ground to optimize the cart's center of gravity. Dual heavy-duty steel retaining chains lock the tank rigidly against the main steel framing.
🔌 Integrated Cable Management Hooks & Push Handle
Prevent structural cord damage and workplace floor clutter. Sturdy side-mounted steel hanging hooks provide dedicated holding wraps for storing lengthy MIG guns, TIG torches, ground leads, and stick stinger cables cleanly. The integrated wide push bar offers comfortable grip leverage when pushing the trolley across garage thresholds.
Multi-Process Workshop Adaptability
With an open-shelf layout designed to optimize equipment cooling ventilation, this industrial trolley easily handles:
- Multi-Process Inverter Welders: Holds MIG wire-feeders or TIG power supplies securely on the angled top deck with plenty of lower space for spare spools and filler rods.
- Plasma Cutters & Consumables: Keeps high-voltage plasma setups elevated away from floor dust, with space below for air regulators and torch consumables.
- MMA Stick & TIG Operations: Easily transports specialized electrode stinger clamps, heavy ground leads, safety gloves, and slag-chipping hammers on an easily wiped down steel platform.
