NEW
Garvee Heavy Duty 3 Ton Manual Chain Hoist - 6600 lbs Capacity G80 Alloy Steel Chain Block with 10 FT Lift Height, 343N Hand Pull Force & Dual Pawl Brake for Garage, Warehouse & Factory (Orange)
| Hoist Specification | Official Engineering Details |
|---|---|
| Brand Name | Garvee |
| Item Type Name | Heavy-Duty Manual Chain Hoist Block |
| Product Grade | Strictly G80 Grade Load Rating |
| Max Load Capacity | 3 Ton / 6,600 lbs (2,993.7 kg Maximum Working Load Limit) |
| Lifting Travel Height | 10 Feet (3.0 Meters) Travel Distance |
| Hand Pulling Force | 343 Newtons (343N Force Requirement at Peak Load) |
| Braking Configuration | Advanced Mechanical Dual Pawl Friction Brake Assembly |
| Casing Profile Depth | 5.71 inches (14.5 cm Lateral Depth Width) |
| Casing Face Width | 7.48 inches (19.0 cm Front Panel Face Width) |
| Main Structural Material | High-Tensile Industrial Alloy Steel Housing Frame |
| Chain Finish Treatment | Hot-Dipped Galvanized Rust-Resistant Coating |
| Rigging Hook Properties | 360° Fully Swiveling Drop-Forged Steel with Spring Safety Latches |
| Casing Shell Coating | Impact-Durable High-Visibility Safety Orange Powder Finish |
| Total Hoist Net Weight | 44.4 Pounds (20.0 kg Exact Product Weight) |
Garvee Heavy Duty 3 Ton Manual Chain Hoist - 6600 lbs Capacity G80 Alloy Steel Chain Block with 10 FT Lift Height, 343N Hand Pull Force & Dual Pawl Brake for Garage, Warehouse & Factory (Orange)
Garvee Heavy-Duty 3-Ton 6,600 lbs Manual Chain Hoist Block
Take complete mechanical control of your heaviest workshop lifts with an industrial rigging system built for extreme durability. The Garvee 3 Ton Manual Chain Hoist is a premium, high-tonnage lifting solution engineered to lift up to 6,600 lbs safely and efficiently. Crafted with a rigid alloy steel body that measures a compact 5.71 by 7.48 inches, this chain block features 10 feet (3 meters) of premium G80 grade galvanized load chain. Optimized for confined overhead gantries and remote job sites where electricity is unavailable, its advanced internal gear mechanism reduces the required operator input to an efficient 343N of hand pulling force. Finished in high-visibility safety orange and armed with an instant-acting dual pawl safety brake, this 44.4 lb workhorse delivers the absolute stability, control, and endurance needed by commercial mechanics, warehouse crews, and industrial factory teams.
Fail-Safe Overhead Control with Dual Pawl Brake Technology
Lifting a multi-ton payload like a diesel engine or factory machine comes with immense risk. Lower-grade hoists can slip, jerk, or experience sudden brake failure, leading to dropped cargo, ruined equipment, and severe workplace injuries. The Garvee 3-ton chain hoist eliminates these hazards through a premium dual-pawl mechanical braking design. This advanced configuration uses double safety pawls that engage instantly against the load gear, ensuring that the hoist grips the payload firmly the exact second you stop pulling the hand chain. Whether you are lifting a full 6,600 lbs to the maximum 10-foot ceiling height or suspending a heavy chassis inches off the floor for precise alignment, this fail-safe block system maintains absolute positional hold without slipping or settling over time.
Premium Structural Engineering Features
🏗️ Certified G80 Grade Galvanized Lifting Chain
Uncompromising load-bearing security. The hoist uses premium, hardened G80 alloy steel links that resist elongation under extreme stress, protected by a hot-dipped galvanized finish that stops rust and chemical corrosion cold.
⚙️ High-Efficiency 343N Pulling Mechanism
Maximum leverage with minimal user strain. The inner gear assembly features deep-groove guide pockets that drop the required operation threshold to a smooth 343N of force, ensuring fluid hand tracking and avoiding chain jams.
🔄 360° Rotating Drop-Forged Steel Hooks
Tangle-free rigging versatility. Both top and bottom hooks swivel a full 360 degrees to permit flawless alignment under load, and come equipped with heavy-duty spring-loaded latches to keep rigging slings firmly trapped.
🛡️ Ultra-Compact Impact Resistant Steel Housing
Built to survive harsh shop treatment. Measuring 5.71 inches in profile depth and 7.48 inches across the face, the hardened alloy steel outer shell shields the vital brake and gear systems from dirt, side blows, and structural impacts.
Multi-Environment Industrial Applications
With its extreme 6,600 lbs working load rating and zero electrical dependency, this manual chain block is perfect for:
- Automotive Repair & Heavy Fleet Garages: Safely lifting out commercial engines, pulling transmissions, and aligning truck chassis panels.
- Industrial Warehouses & Shipping Docks: Offloading mid-weight freight cargo, positioning steel storage containers, and maneuvering crated industrial gear.
- Manufacturing Plants & Construction Sites: Suspending overhead structural beams, positioning heavy concrete molds, and anchoring production line machinery.
