NEW
Garvee 6 × 7 FT Polycarbonate Greenhouse, Walk-In Outdoor Plant House with 4 mm Twin-Wall Panels, Aluminum Frame, Lockable Sliding Door, Roof Vent and Rain Gutters, Green
| Brand | Garvee |
| Product Type | Walk-In Polycarbonate Greenhouse |
| Nominal Size | 6 FT × 7 FT |
| Overall Dimensions | 66.93" L × 88.39" W × 76.77" H |
| Frame Material | Aluminum Alloy |
| Corner Support Material | Steel |
| Panel Material | Twin-Wall Polycarbonate |
| Panel Thickness | 4 mm |
| Light Transmission | Approximately 70% |
| UV Filtering | Over 99.9% |
| Color | Green |
| Door Type | Sliding Door |
| Door Dimensions | 22.64" W × 60.63" H |
| Lockable Door | Yes |
| Roof Vent | Adjustable |
| Rain Gutter System | Integrated |
| Wind Resistance | Up to 50 mph When Properly Anchored |
| Snow Load Capacity | Up to 40 kg/m² |
| Base Installation | Anchorable to Compatible Soil or Concrete Surfaces |
| Assembly Method | Quick-Connect Frame with Slide-In Panels |
| Recommended Assembly | 2 Adults |
| Estimated Assembly Time | Approximately 6–7 Hours |
| Assembly Required | Yes |
| Product Weight | 75.8 lbs |
| Number of Packages | 2 Boxes; Delivery Times May Vary |
| Recommended Plants | Vegetables, Herbs, Flowers, Seedlings, and Potted Plants |
| Recommended Locations | Backyard, Garden, Patio, Lawn, and Outdoor Growing Area |
Garvee 6 × 7 FT Polycarbonate Greenhouse, Walk-In Outdoor Plant House with 4 mm Twin-Wall Panels, Aluminum Frame, Lockable Sliding Door, Roof Vent and Rain Gutters, Green
6 × 7 FT Walk-In Polycarbonate Greenhouse for Home Gardening
Protect seedlings, vegetables, herbs, flowers, and potted plants inside a walk-in growing structure featuring twin-wall polycarbonate panels, an aluminum frame, adjustable ventilation, a lockable sliding door, and integrated rain gutters.
Twin-Wall Panels Balance Light and Insulation
The 4 mm polycarbonate panels allow diffused sunlight into the growing area while helping retain warmth and reduce direct UV exposure.
Approximately 70% Light Transmission
Diffused natural light reaches plants without the intense glare produced by completely transparent single-layer panels.
Over 99.9% UV Filtering
The panel structure filters a substantial amount of ultraviolet radiation while allowing useful growing light into the greenhouse.
Twin-Wall Air Chambers
Internal air spaces help reduce rapid temperature changes compared with thin single-layer greenhouse coverings.
Impact-Resistant Construction
Polycarbonate panels provide a lightweight and practical alternative to fragile glass for residential greenhouse use.
Reinforced Frame for Outdoor Stability
The aluminum structure and steel corner supports create a stable framework for the panels, roof, door, vent, and gutter system.
Walk-In Space for Plants and Gardening Tasks
The approximately 66.93" L × 88.39" W × 76.77" H structure provides room to enter, organize plants, and perform routine care.
Room for Plant Shelving
Add compatible freestanding shelves, racks, seed trays, or potting accessories according to the available floor space.
Useful Standing Height
The 76.77-inch overall height provides comfortable headroom for many adults during regular plant-care tasks.
Dedicated Growing Zone
Separate temperature-sensitive plants, seedlings, herbs, and vegetables from open backyard conditions.
Seasonal Plant Protection
Helps shield plants from light frost, wind, excessive rain, and sudden outdoor temperature changes.
Adjustable Ventilation for Climate Control
Open or close the roof vent according to sunlight, outdoor temperature, humidity, and the needs of the plants inside.
Release Excess Warm Air
Opening the roof vent allows rising heat to escape during warmer or sunnier weather.
Improve Air Circulation
Fresh airflow helps reduce stagnant, overly humid conditions around leaves, stems, soil, and growing trays.
Manual Adjustment
Change the vent opening according to daily weather rather than keeping the greenhouse continuously sealed.
Supports Seasonal Growing
Use ventilation together with shading, watering, and monitoring to maintain more suitable plant conditions.
Sliding Door with Lockable Handle
The front entry provides convenient access while limiting the swing clearance required by a traditional hinged door.
22.64-Inch Entry Width
The opening accommodates routine access with plants, small tools, watering supplies, and compatible garden accessories.
Space-Saving Sliding Design
The door moves along the greenhouse frame without swinging outward into nearby garden paths or patio areas.
Lockable Handle
The locking feature helps discourage unwanted access when the greenhouse is not being actively used.
Easy Daily Entry
Open the door for watering, pruning, harvesting, ventilation, and routine inspection of plants.
Integrated Gutters Support Rainwater Collection
Roof-edge channels direct runoff toward the gutter outlets for cleaner drainage and optional collection.
Direct Roof Runoff
Gutters guide rainwater away from the greenhouse side walls and immediate doorway area.
Connect to a Collection Container
Position compatible tubing or a rain barrel beneath the outlet when local conditions and regulations allow.
Support Garden Watering
Collected rainwater may be used for suitable outdoor plants according to local water-quality conditions.
Reduce Ground Splashing
Controlled runoff helps limit uncontrolled water flow immediately beside the greenhouse foundation.
Suitable for Multiple Growing Projects
Quick-Connect Components Simplify Assembly
Clearly labeled frame parts and slide-in polycarbonate panels help organize the installation process for two adults.
Prepare the Foundation
Select a flat, level, well-drained location and verify the final orientation before opening all packages.
Assemble the Base
Connect the lower frame and check that the corners remain square before building upward.
Install Frame and Panels
Build the walls and roof in sequence, sliding each labeled polycarbonate panel into its corresponding channel.
Anchor and Inspect
Secure the base to the compatible surface and inspect the door, vent, gutters, panels, and fasteners.
Build a More Controlled Space for Home Gardening
With a nominal 6 × 7 FT layout, 4 mm twin-wall polycarbonate panels, aluminum frame, steel corner supports, adjustable roof vent, lockable sliding door, integrated gutters, and quick-connect assembly system, this Garvee greenhouse creates a practical growing area for backyards, gardens, patios, and lawns.
