NEW
Garvee 10 x 20 FT Carport Zipper Door Replacement, 160G Triple-Layer PE Roll-Up Entrance Cover with UV & Water Resistance, 32 Ball Bungees, Gray, Frame Not Included
| Product Type | Carport Zipper Door Replacement |
| Compatible Carport Size | 10 x 20 ft |
| Material | Triple-Layer PE Fabric |
| Fabric Specification | 160G |
| Door Style | Roll-Up Zippered Entrance |
| UV Protection | Yes |
| Water Resistance | Water Resistant |
| Color | Gray |
| Product Weight | 9.9 lb |
| Attachment Method | Ball Bungee Fasteners |
| Included Accessories | 32 Ball Bungee Cords |
| Recommended Uses | Portable Garage, Car Shelter, Boat Storage, and Equipment Shelter |
| Frame Included | No |
| Complete Carport Included | No |
| Installation Required | Yes |
Garvee 10 x 20 FT Carport Zipper Door Replacement, 160G Triple-Layer PE Roll-Up Entrance Cover with UV & Water Resistance, 32 Ball Bungees, Gray, Frame Not Included
Replace a Worn Carport Entrance Without Buying a Complete New Shelter
Designed for compatible 10 x 20 FT portable carports, this gray 160G triple-layer PE replacement door adds roll-up zipper access and renewed coverage for vehicles, boats and outdoor equipment.
This product includes a replacement zippered door cover and attachment bungees. The metal frame, roof canopy, sidewalls and complete carport structure are not included.
Practical Protection for an Existing Carport Frame
Replace a damaged or worn entrance panel while keeping your compatible portable garage or outdoor storage shelter in service.
Triple-Layer PE Fabric
Reinforced polyethylene construction provides practical coverage against sunlight, light rain, dust and outdoor debris.
Roll-Up Zipper Access
Open the entrance for vehicles or equipment, then roll and secure it when unobstructed access is needed.
UV-Resistant Material
The outdoor PE material helps reduce damage caused by regular exposure to sunlight.
Water-Resistant Coverage
Helps protect stored vehicles and equipment from light rain and moisture when correctly attached.
Ball Bungees Included
Thirty-two flexible fasteners help attach the replacement panel to compatible frame connection points.
Neutral Gray Finish
The gray color coordinates with many portable garages, storage shelters and outdoor structures.
Open, Roll Up and Close as Storage Needs Change
The zippered entrance provides flexible access without requiring the replacement panel to be removed from the frame.
- Unzip the entrance for vehicle and equipment access
- Roll the door upward to keep the opening clear
- Close the zipper for additional entrance coverage
- Suitable for routine garage and storage access
- Avoid forcing the zipper when the fabric is under uneven tension
Check Compatibility Before Ordering
A matching nominal carport size does not always guarantee identical frame spacing, roof shape or attachment locations.
Confirm Shelter Size
Verify that your existing portable carport is the compatible nominal size.
Check the Opening
Compare the entrance width, height and roof profile before purchase.
Inspect Connection Points
Ensure the existing frame supports ball-bungee attachment around the panel.
Help Shield Vehicles and Equipment from Everyday Exposure
The replacement panel restores entrance coverage for a compatible portable garage used around homes, farms, workshops and storage areas.
- Helps reduce direct exposure to sunlight
- Provides a barrier against light rain and airborne debris
- Supports cleaner storage for vehicles and equipment
- Suitable for seasonal or temporary outdoor shelters
- Not intended to make an open shelter completely waterproof or airtight
Four Steps for Replacement Installation
Remove the old panel, inspect the frame and attach the replacement evenly to avoid excessive tension on the zipper.
Remove the Old Cover
Detach the existing entrance panel and remove damaged fasteners.
Inspect the Frame
Check the attachment points for sharp edges, rust or damaged tubing.
Align the Panel
Center the replacement door before securing the upper and side edges.
Attach Evenly
Install the ball bungees gradually and maintain balanced fabric tension.
Suitable for Multiple Outdoor Storage Shelters
Restore convenient entrance coverage for compatible portable structures protecting vehicles and outdoor equipment.
Product Specifications
Essential material and compatibility information for purchase planning.
| Product Type | Carport Zipper Door Replacement |
|---|---|
| Compatible Carport Size | 10 x 20 ft |
| Material | Triple-Layer PE Fabric |
| Fabric Specification | 160G |
| Door Style | Roll-Up Zippered Entrance |
| UV Protection | Yes |
| Water Resistance | Water Resistant |
| Color | Gray |
| Product Weight | 9.9 lb |
| Attachment Method | Ball Bungee Fasteners |
| Included Accessories | 32 Ball Bungee Cords |
| Frame Included | No |
| Complete Carport Included | No |
| Installation | Required |
Compatibility and Weather Notice
Measure your existing frame and entrance before ordering. Secure all attachment points evenly and inspect the panel regularly. Remove snow accumulation and reinforce the complete shelter with appropriate anchors or weights during windy conditions. The replacement door does not include a structural frame or convert an unsuitable shelter into a permanent building.