Garvee 39"x32" Stainless Steel Pool Handrail with Blue Grip Cover Rustproof Stair Rail, 250 lbs Load Capacity for Inground Pools

The rail is great but dont be fooled by the picture. The wrap isn't that long. It is only about 2' long and doesn't cover the whole rail like it shows. I had to order an 8' wrap to cover the whole rail.

Best decision I made, very sturdy and supportive - contemplating ordering another like our neighbor hasfirst picture is ours , 2nd picture is hers.Easy to install but we did rent a hammer drill from Home depot to drill thru the concrete - Hand rail is of good quality and very stirdy

Now that I'm getting older, I now need a handrail so wife (and me) can get out of the pool easily.This one is the perfect height and length.My deck is concrete, so that is always a challenge, but I have various concrete drill bits that made fairly short work of it. I was not able to use the 12 mm bit provided as it requires as SDS chuck. (And it is a different size than my SDS chuck.The bolts are metric, but the hole size in the mounting plate allowed match drilling with a 3/8 inch bit to mark the locations. I also used a 1/4 inch bit to quickly drill a pilot hole and then a 1/2 inch instead of the 12 mm (0.472 inch) bit. The bolts still fit tightly and I had to use my 1/2 inch breaker bar with a 13 mm socket to install the bolts. They did supply a wrench, but I couldn't come close to generating the required torque with it.The railing is in 3 pieces that are assembled with 6 beveled screws and the screwdriver/wrench combo supplied. Once I was able to get them started, they could easily be finger tightened all the way.Using the screwdriver to do final tightening only required an 1/8 to 1/4 turn to fully tighten.

This handrail was easy to install and provides a safe and sturdy support for swimmers. Everything you need is included. I would strongly recommend using a socket to bolt it in place, rather than the small wrench that comes with it.