NEW
Garvee Sun Shade Sail 12' × 16' Rectangle, 95% UV Block Breathable HDPE Outdoor Canopy with Curved Edges and Installation Ropes for Patio, Backyard, Deck, Garden and Pool, Sand
| Brand | Garvee |
| Product Type | Rectangle Sun Shade Sail |
| Nominal Size | 12 FT × 16 FT |
| Approximate Finished Dimensions | 141.73" × 188.98" |
| Material | High-Density Polyethylene (HDPE) |
| Fabric Construction | Breathable Woven Fabric |
| Color | Sand |
| Shape | Rectangle |
| UV Block | Up to 95% |
| Edge Design | Curved Tension Edges |
| Water Resistance | Not Waterproof |
| Size Tolerance | Approximately ±4" |
| Recommended Installation Gap | 0.5–1 FT Between Sail and Anchor Points |
| Included Accessories | Installation Ropes |
| Product Weight | 9.92 lbs |
| Recommended Use | Sun Protection and Outdoor Shade |
| Recommended Locations | Patio, Backyard, Deck, Garden, Pool, Pergola, Carport, and Play Area |
| Severe Weather Care | Remove During Strong Winds, Storms, or Snow |
Garvee Sun Shade Sail 12' × 16' Rectangle, 95% UV Block Breathable HDPE Outdoor Canopy with Curved Edges and Installation Ropes for Patio, Backyard, Deck, Garden and Pool, Sand
12 × 16 FT Rectangle Sun Shade Sail with Up to 95% UV Block
Create a cooler and more comfortable outdoor area with a breathable HDPE shade sail designed for patios, decks, pools, gardens, pergolas, play areas, and backyard seating spaces.
Reduce Direct Sunlight over Outdoor Spaces
The woven shade fabric helps limit direct sun exposure while creating a practical shaded area for relaxation, dining, play, and everyday outdoor activities.
Up to 95% UV Protection
Dense HDPE fabric helps block a substantial amount of direct sunlight and ultraviolet exposure beneath the sail.
Large Rectangle Coverage
The 12 × 16 FT layout provides broad shade over patios, outdoor furniture, poolside seating, and play areas.
Comfortable Outdoor Areas
Add shade above dining tables, lounge chairs, sandboxes, grills, garden workspaces, and relaxation zones.
Warm Sand Color
The neutral finish coordinates with wood, stone, concrete, greenery, and a wide range of exterior décor.
Breathable HDPE Fabric Helps Release Heat
Unlike solid tarps, the woven material allows warm air and light breezes to pass through the shade area.
Curved Edges Support Proper Tension
Each side curves slightly inward so the fabric can be stretched evenly between secure mounting points.
Reduces Center Sagging
Properly tensioned curved edges help pull the fabric outward and maintain a cleaner installed appearance.
Creates a Modern Sail Shape
The curved outline gives the canopy a lighter architectural appearance than a square-edged outdoor tarp.
Allows Installation Tension
Leave sufficient space between each corner and its anchor point for ropes, hooks, or tensioning hardware.
Natural Material Stretch
HDPE fabric may stretch slightly when tensioned, helping the sail settle into its installed position.
Measure the Installation Area Before Ordering
The listed 12 × 16 FT size is nominal. Finished dimensions may vary because of the curved edges and natural properties of the woven material.
Allow 0.5–1 FT at Each Corner
Leave space between the sail and mounting points for ropes, hooks, turnbuckles, or other compatible hardware.
Approximately ±4-Inch Tolerance
Finished dimensions may vary slightly because of cutting, stitching, curved edges, and fabric tension.
Measure Anchor-to-Anchor Distance
Plan the position of walls, posts, trees, columns, or mounting structures before selecting the sail size.
Choose Strong Support Points
Each mounting location must be structurally suitable for the tension created by the installed shade sail.
Shade Multiple Outdoor Areas
Recommended Installation Process
Correct measurement, strong anchor points, and even corner tension help improve the sail’s appearance and outdoor performance.
Plan the Shade Area
Determine the desired coverage and identify four strong mounting points around the installation space.
Leave Tensioning Space
Allow approximately 0.5–1 FT between each sail corner and its corresponding mounting point.
Connect All Corners
Use the included ropes or compatible outdoor shade hardware to connect the sail to the mounting points.
Tension Evenly
Tighten each corner gradually and evenly until the fabric is firm without excessive overstretching.
Create a Cooler and More Inviting Outdoor Space
With a nominal 12 × 16 FT size, breathable 100% HDPE construction, up to 95% UV blockage, curved tension edges, included installation ropes, and a neutral sand finish, this Garvee shade sail provides practical sun protection for patios, decks, gardens, pools, pergolas, and backyard activity areas.
