Garvee 10 Inch King Size Bed Frame, King Platform Bed Frame, Heavy Duty Metal King Size Bed Frame with Steel Slat Support, No Box Spring Needed, Easy Assembly, Black

Easy enough to put together! I just moved and to save money I got a full size bed for now. As a 5ft 2 plus size person it holds up great I was nervous of course but it’s as described .

This was easy to put together just with myself. Didn't break any nails:-D I have a bad back so it took me like 1.5hrs. It feels solid enough, but I'm still terrified. But hey, it was under $100 when I bought. We'll see in a few days. The bed does "sink" like maybe 1.5", which is good because I was scared of it moving around.Update after 3 days: It's great. No squeaky noises. I'm almost 300lbs, used a box spring and mattress on it, and I toss and turn all night so, it's def held up. Good buy.

Size Bought)QUEEN w/ 4” legsThe Build)Building the frame was way easier than anticipated! Some reviews will tell you it’s hard but if you’re an individual that doesn’t have a problem being on their hands and knees then it’s not trivial at all. Instructions are pictorial and easy to understand. I built this with one other person and it took us around 30 if not 20 minutes. Doing it on your own would probably take an hour or less. Only tricky parts were adding the cushion tape for the spine of the bed and pushing the bars into place that go across the bed. (9/10)Noise Review)If you bought this frame for its no noise quality to avoid NOISE👀 then it definitely does the job! Only time it’ll creak “during action” is if you’re not in the center. The creak although isn’t loud!(9/10)Mattress + Frame Review)I currently have a new foam mattress on the frame with no box frame underneath. Could be the fact it’s a new mattress but it works perfectly! No issues what-so-ever!(10/10)Review)Overall the frame has simple assembly, HARDLY any noise, works perfectly without a box frame, and still has just enough space to slide slippers underneath. Simple, comfortable, looks great, sturdy, reliable, and cheap. A frame I’m very happy I bought!(10/10)

The bed was easy to put together and it feels sturdy. It's not fancy to look at but I love that it's a nice low height for my turkey but also high enough that my robot vacuum can clean underneath for me!

Summary: I bought this for my little elementary school age kids so they wouldn't get hurt falling off the bed. The makers did a good job with most metal pieces, welding and finish, but the head and foot bars, arguably the more important pieces, had a poor finish because of sharp jagged edges.PROS:-Lightweight-Easy to assemble-Mattress sits lower than edges so mattress doesn't slide around. I read reviews for other similar products where the mattress slides everywhere, possibly because the support bars are on the same level as the outer edge bars???-Screws and washers had an extra 1 quantity in case needed.CONS:-The head and foot bars has jagged sharp edges. If kids ran their fingers or foot against this, no doubt it'll hurt or bleed. I had to use my angle grinder to sand off the sharp edges, and then spray painted it black. If you don't have a power tool, you can use a metal filer, or a corner cover. This is unacceptable so 1 star removed. The other items didn't have any problems.-There were small metallic flakes inside the plastic bags holding the metal bars, with 1-2 stuck on the metal bars themselves. I had to manually feel each bar to ensure all of them came off. I had to carefully dispose of the plastic bags, and the main shipping boxes and vacuum the entire area afterwards. To put it into perspective, in an unrelated incident, I was in the kitchen, felt something under my feet and instinctively brushed it off my other foot. It was a sharp piece of ceramic which then cut one of the arteries of my upper foot, causing severe bleeding that wouldn't stop for almost an hour. I had to keep pressure on it for that long. Obviously you don't want that happening with these sharp metallic flakes.-Some bars, especially the head and foot bars had some imperfections after the spray painting from factory where if kids ran their hands over the bars, they may get hurt. For these small imperfections, I used a nail filer to smooth it out.OTHER THOUGHTS:- I replaced the top flat washers with lock washers as lock washers are more secure and doesn't come loose easily. I accidentally didn't buy enough, otherwise I'd have replaced all of them.-I also put some corner protectors on to prevent my little ones from getting hurt.-The product page didn't list inside dimensions where the mattress sits. I measured them to be 75 inches long and 39 inches wide for those who need to know.

Equipment are a bit heavy but I build it all together by myself :)) sooo recommend

I have a dog with bad hips and I missed cuddling him. He now jumps bed all the time and I could not be happier. No complaints here, also very quickly put together the bed frame

I got this for my soon to be 3 yr old grandson. It's perfectly safe for him to get in and out of bed in!

The Bed is amazing. I put it together in less than an hour by myself as a woman …….you don’t need any tools the books that they give you is very instructional and helps a lot the first picture I have up there is the 10 inch I thought maybe it would sit higher than the 6 inch but they both sit pretty low. I don’t mind that’s exactly what I was going for but I can imagine the 6 inch would be much much much shorter again great product really sturdy. It comes with everything you need. Didn’t see a problem with this at all and it actually came in early.

I like but would recommend buying the 10 in one since this one is very low to the ground