Garvee Clamp On Trailer Hitch 2" Ball Mount Adapter Compatible With Deere Bobcat Tractor Bucket Black 18"x2.5"x7"
Exclusive benefits for GarveeBronze (1x points on spending).
| Brand | Garvee |
| Item Depth | 2 Inch |
| Model | 2" Ball Mount Adapter |
| Item Weight | 15 pounds |
Garvee Clamp On Trailer Hitch 2" Ball Mount Adapter Compatible With Deere Bobcat Tractor Bucket Black 18"x2.5"x7"
The 2" trailer hitch receiver is designed to easily install on the front of your skid steer or tractor loader bucket. This universal mount slides over the bucket cutting edge and utilizes the underside for leverage. This durable receiver is constructed of an all-steel tubular structure with a secure clamp, puck, and side supports that help to prevent your hitch from turning and twisting when in use. With an impressive weight capacity of up to 1,100 LB, you can tow mid-size trailers and other towable implements.FEATURES: - Redesigned to include side tabs to prevent shifting while in use - Converts a standard tractor bucket into a versatile 2" x 2" receiver - Quickly move your boat, RV, trailer, or camping accessories - Secure bolt clamp and puck fixes hitch onto the bucket lips up to 2" - Not designed for extended towing or hauling - Installs in secondsSPECIFICATIONS: - Height Without Clamp: 7.5-in - Overall Width: 7.5-in - Overall Depth: 16.75-in - Top Tube: 2-in x 2-in - Receiver Inside Tube: 2-in x 2-in - Finish: Powder-Coated Black - Material: Steel - Towing Capacity: 1,100 lb. - Product Weight: 21 lb.
Direct bolt on, no additional drilling required. It is used as a quick change unit on the front of bucket tractors. It quickly clamps the bucket of a skid steer loader or tractor in seconds.
The new clamp-on receiver hitch for tractor buckets adds a twin-screw design with a thicker screw to prevent bending and breaking.
Constructed of heavy-duty steel. Rugged glossy red powder coat finish. Tractor bucket hitch fits all 2" hitch plugs.
- Versatile Compatibility: Our 2" receiver trailer hitch fits all standard 2" hitch inserts, making it perfect for moving trailers and other implements.
- Heavy-Duty Construction: Made from durable steel and coated with a rust-resistant finish, our hitch adapter is built to last. It weighs 20 lbs and measures 18" L x 2 1/2" W x 7" H.
- Wide Range of Uses: Whether you're towing boats, RVs, or camping accessories, our hitch adapter has the towing capacity you need for heavy-duty work in industrial, agriculture, and construction settings.
- Easy Installation: Our hitch adapter can be quickly clamped onto the bucket of your tractor without any additional drilling required. It's a quick-change device that's easy to install and disengage.
- Stay Straight and Save Time: Our hitch adapter features an extremely durable baffle that stays straight on the loader bucket, saving you time and energy.
Specifications
| Brand | Garvee |
| Item Depth | 2 Inch |
| Model | 2" Ball Mount Adapter |
| Item Weight | 15 pounds |
Reviews
Customer Reviews
This 2" trailer hitch fit the buckets of my 32 hp and 56 hp orange tractors without issue.It did not fit the massive 6-way bucket on my backhoe.The welds on this hitch were good with few imperfections.It will accept a standard 2" hitch accessory; ball, hook, etc.The hitch pin hole accepts a 5/8" pin and clip.The L-clamp and flange nut are threaded M16-2.00While testing, I found that the hitch worked fairly well for light weight 8 to 16 foot utility trailers when pushing or pulling.However, with a heavy cattle trailer, the hitch had a tendency to move from side to side. This happened when pushing and (often) when pulling the trailer. Repositioning the flange nut to alternate locations on the clamp had no effect. I ended up using a short piece of 1/4" chain and a load binder to help stabilize the hitch and it worked quite well.This versatile hitch can be installed and removed very quickly on my loader buckets.
I got this to try and adapt a hitch to my lawn tractor. It didn't quite work out the way I was hoping it would, but that is no fault of this product. It's very heavy and solidly made. I'm not entirely sure what the intent was with the nut/washer combo, as the body itself is already threaded. I guess you can just add it to the end of the screw for extra footprint area.The screw is a fixed L shape, and the handle does not flip over so you will need enough room to rotate it in order to tighten it down.This review was for "Clamp On Trailer Hitch, 2" Ball Tractor Mount Receiver, Tractor Bucket Trailer Hitch Compatible with Deere Bobcat Tractor Bucket
I haven’t used it. It looks like it’s gonna work great. It’s just what I was looking for. It doesn’t have instructions. If you need instructions, I don’t know what to tell you. Just what I was looking for wish it was in green., lol. Might hit up the threads with some lithium grease?Update 7-30-24:: I was lazy and kept the tooth bar on. Im going to take it off the 1025r bucket next time. It was just barely strong enough. Nice but a 3ph is more ideal i think.
This clamped right on bucket. Moved a trailer in woods out to an open area. Loved it for ease of use and allowed me to maneuver with ease.
