GARVEE Metric Ratcheting Wrench Set 6-19mm, Cr-V Steel with Bag

I am so impressed with this ratchet wrench set, and the build quality really surprised me! The roll up case is super heavy duty! This is a perfect set for my car, all of my bikes, and my snowblower. You will never have problems with these wrenches bending and they are virtually unbreakable. As far as value, these are an extremely great value! A comparable set at a hardware store would run you 3x as much. The chrome vanadium steel is super durable and should last a life time. They are very smooth and thicker than most comparable sets. You turn them over to reverse the ratchet direction. This complete metric set goes from 9mm-18mm. Each size wrench has been imprinted into the steel, which I like so I don't have to guess on the sizing. Each ratchet has 72 micro teeth so as not to give way when you're tightening. It has 180 degree flex head for the more difficult spots, and an HRC hardness rating of 47-50. One of my favorite things about them is that the heads are tapered for confined spots and really difficult work areas. The build quality on these are just wonderful. I just don't think that you are going to find anything near this quality for the asking price! I am so glad that I got this set and highly recommend it.

its a nice little set with a roll bag that isn't too bulky, grommets to hold on a peg board. Ratchet action has a satisfying click, and was adequate for the torque range you'd expect on this length. the little allen bolt that makes up the hinge did have a tendency of loosening up after use but i was wrenching them pretty hard. The hinge action is smooth, there are no detents at 15, 30, 45 degrees. This offers more versatility but if you are in automotive and use these to get at tight spots, the detents help keep the ratchet at the proper angle. Its very frustrating when the hinged head flops off the bolt. It's a nice-to-have but a layer of duct tape wrapped around the hinge area is a handy substitute too. I would compare these to the ICON series at harbor freight.

I've been needing a set of ratcheting wrenches for quite some time so super pleased to try these out. They are a little lighter weight than some I've used so I'd question how they will handle heavy workloads but for me they're just fine. I'm not a mechanic but I do like to tinker once a week or so. The case is really nice and it rolls up tight and secures with 2 clips. The case does have quality issues, for one the 8mm is pretty much sewed into the material somehow and will not come out :) I will have to extract it by cutting some of the material. The ends of the straps are tattered and frayed, no biggie, just cut and not finished properly. I can overlook the flaws here at this price point, I'm fine. Happy to have this set!

Comes with bag, these wrenches are metric sized, but can substitute for SAE in close cases. Recommended for usability

Well made works just as good as craftsman would definitely recommend

With a rolled bag that isn't overly large and grommets to hang on a peg board, it's a lovely small set. The ratchet action was sufficient for the amount of torque range you would anticipate on this length and had a pleasing click. Although I was twisting them quite firmly, the small allen bolt that forms the joint did have a propensity to loosen up after use. There are no detents, which at 15, 30, or 45 degrees, and the hinge's action is smooth.

If you’ve ever tried to loosen a bolt in a tight spot and ended up questioning your life choices, these wrenches might save your sanity. The flex-head design is a lifesaver, letting you get into awkward angles without having to dislocate your wrist. The 72-tooth ratcheting mechanism is smooth, and you don’t need much movement to get it going, which is great for working in cramped spaces.The chrome vanadium steel feels solid—no flimsy, cheap metal here. They’ve got a nice weight to them without being too bulky, and the polished finish makes them easy to wipe clean after a greasy job. The size range covers most of what you’d run into, though if you need anything smaller than 9mm, you’ll have to look elsewhere.The included roll-up pouch keeps everything organized and easy to grab, which is nice if you’re throwing them in a tool bag or keeping them in the truck. For the price, this set punches above its weight, especially if you do a lot of work on cars or motorcycles. Definitely a solid addition to the toolbox.

Great for my disabled hands. A good addition to my tool box.

The header description says it is a 9mm-19mm set but it actually is a 8mm-19mm set....the picture does correctly show that an 8mm is in the set. It is an impressively nice set of wrenches, good fit, finish and polished, adequately strong handles, the flex end has the right stiffness to stay in place and not 'flop' around so that you can per-position the head at the desired angle then reach in hard to get places to engage the nut, smooth acting fine tooth gearing. Overall very nice wrenches.

This ratcheting wrench set is a solid addition to my toolkit. The flex head design makes it easy to get into awkward spots, and the ratcheting mechanism is smooth with a good amount of grip. The 72-tooth design allows for smaller turns, which is great for working in tight spaces. The wrenches feel sturdy in hand, and the Cr-V steel gives them a nice durability without being too heavy.The included storage bag is a nice touch, keeping everything organized and easy to grab when needed. Sizes range from 9mm to 18mm, covering most jobs I’ve run into. Whether working on a car, motorcycle, or random home projects, this set has been reliable and comfortable to use. Makes things much easier