NEW
Garvee 1-Pack 6FT Rubber Speed Bumps, 22,000 lb Capacity, 2-Channel Cable Protector Ramps with Mounting Hardware, Black & Yellow
| Product Type | Rubber Speed Bump with Cable Channels |
|---|---|
| Pack Quantity | 1 Piece |
| Size per Piece | 38.8" × 11.4" × 2.36" |
| Nominal Length | 6 FT per Piece |
| Load Capacity | Up to 22,000 lb |
| Main Material | Heavy-Duty Rubber |
| Cable Channels | 2 Integrated Channels |
| End Caps | Not Included |
| Set Weight | 44.09 lb |
| Color | Black and Yellow |
Garvee 1-Pack 6FT Rubber Speed Bumps, 22,000 lb Capacity, 2-Channel Cable Protector Ramps with Mounting Hardware, Black & Yellow
GARVEE
6 FT Heavy-Duty Rubber Speed Bump
Control vehicle speed and protect temporary cables with a 22,000 lb load capacity, dual cable channels, high-visibility yellow markings, and a durable one-piece rubber design.
Heavy-Duty Rubber Construction
The durable rubber body absorbs repeated vehicle contact while supporting cars, SUVs, trucks, and service vehicles on suitable surfaces.
Built-In Cable Protection
Two integrated underside channels provide a protected route for extension cords, hoses, pipes, and temporary utility lines.
High-Visibility Traffic Control
Bright yellow markings and a textured black surface make the speed bump easier to identify while improving tire contact.
Traffic Calming and Cable Management in One Ramp
The GARVEE 6 FT Rubber Speed Bump creates a noticeable transition that encourages drivers to reduce speed in controlled traffic areas. Its integrated cable channels also help organize and protect temporary lines beneath passing vehicles.
- 22,000 lb capacity: supports common passenger and commercial vehicles when properly installed.
- 6 FT one-piece length: provides continuous coverage across a wide section of a vehicle path.
- Textured tread: provides additional contact between vehicle tires and the rubber surface.
- Yellow visibility markings: help drivers notice the ramp during daytime and low-light conditions.
- Flexible rubber body: absorbs impact and produces less harsh contact than rigid metal barriers.
Dual Channels for Cables and Hoses
Route extension cords, water hoses, pipes, and temporary utility lines beneath the ramp to reduce direct contact with vehicle tires and maintain a more organized work area.
Pre-Drilled for Secure Mounting
Pre-drilled mounting holes and included hardware help simplify installation. Use anchors that are suitable for the selected concrete, asphalt, or prepared mounting surface.
Designed for Multiple Traffic-Control Locations
Use the 6 FT rubber speed bump in controlled residential, commercial, and industrial vehicle areas.
Specifications
| Product Type | Rubber Speed Bump with Cable Channels |
|---|---|
| Pack Quantity | 1 Piece |
| Overall Dimensions | 72.05" × 11.81" × 1.97" |
| Nominal Length | 6 FT |
| Load Capacity | 22,000 lb |
| Main Material | Heavy-Duty Rubber |
| Cable Channels | 2 Integrated Channels |
| Surface Design | Textured Black Surface with Yellow Visibility Markings |
| Installation | Pre-Drilled Mounting Holes with Hardware |
| Item Weight | 48.50 lb |
| Color | Black and Yellow |
Installation and Use Note
- Install the speed bump on a clean, level, and structurally suitable surface.
- Select mounting anchors that are appropriate for the installation substrate.
- Confirm that cables and hoses fit completely inside the channels before allowing vehicle traffic.
- Do not exceed the rated 22,000 lb load capacity.
- Inspect the mounting hardware, rubber body, and yellow visibility markings regularly.
- Check applicable property, access, and local installation requirements before mounting.
