NEW
Garvee 2-Pack 3.3 FT Rubber Speed Bumps, 22,000 lb Capacity, 2-Channel Cable Protector Ramps with Mounting Hardware, Black & Yellow
| Product Type | Rubber Speed Bump with Cable Channels |
|---|---|
| Pack Quantity | 2 Pieces |
| Size per Piece | 38.8" × 11.4" × 2.36" |
| Nominal Length | 3.3 FT per Piece |
| Load Capacity | Up to 22,000 lb |
| Main Material | Heavy-Duty Rubber |
| Cable Channels | 2 Integrated Channels |
| End Caps | Not Included |
| Set Weight | 44.09 lb |
| Color | Black and Yellow |
Garvee 2-Pack 3.3 FT Rubber Speed Bumps, 22,000 lb Capacity, 2-Channel Cable Protector Ramps with Mounting Hardware, Black & Yellow
GARVEE
Heavy-Duty Traffic Control with Built-In Cable Protection
The GARVEE 6 FT Rubber Speed Bump combines a 22,000 lb load capacity, dual cable channels, high-visibility yellow strips, and a textured driving surface for parking lots, garages, warehouses, schools, and controlled-access roads.
Heavy-Duty Rubber Construction
The flexible rubber body absorbs repeated vehicle contact while resisting regular outdoor and commercial use.
Integrated Dual Cable Channels
Two underside channels help route cords, hoses, and pipes beneath vehicle traffic while keeping work areas more organized.
High-Visibility Surface
Yellow reflective strips and a textured surface help drivers identify the speed bump while improving tire contact.
Traffic Calming for Commercial and Residential Areas
This heavy-duty rubber speed bump helps encourage lower vehicle speeds in parking areas, private roads, school zones, garages, warehouses, and loading facilities. Its low-profile shape creates a noticeable driving transition without using a rigid metal structure.
- 22,000 lb capacity: supports common passenger and commercial vehicles on suitable surfaces.
- 6 FT coverage: spans a wide section of a standard vehicle path.
- Textured top surface: provides additional tire contact during vehicle passage.
- Yellow visibility strips: make the speed bump easier to identify during daytime and low-light use.
- Rubber impact absorption: helps reduce harsh contact noise compared with rigid traffic-control materials.
Protect Cables, Hoses, and Utility Lines
Two channels underneath the speed bump create a protected route for temporary electrical cables, water hoses, pipes, and similar lines. Select cables and hoses that fit fully within the channel dimensions.
Pre-Drilled for Secure Installation
Pre-drilled mounting holes simplify placement on a properly prepared surface. Confirm that the anchors and installation method are compatible with concrete, asphalt, or the selected substrate.
Suitable for Multiple Traffic-Control Locations
Use compatible sections to create a traffic-calming and cable-management layout for private commercial or residential vehicle areas.
Specifications
| Product Type | Rubber Speed Bump and Cable Protector |
|---|---|
| Overall Dimensions | 72.05" × 11.81" × 1.97" |
| Overall Length | Approximately 6 FT |
| Load Capacity | 22,000 lb |
| Main Material | Heavy-Duty Rubber |
| Cable Channels | 2 Integrated Channels |
| Installation | Pre-Drilled Mounting Holes with Hardware |
| Item Weight | 44.09 lb |
| Color | Black and Yellow |
Installation and Use Note
- Install the speed bump on a clean, level, and structurally suitable surface.
- Use anchors that are appropriate for the selected concrete, asphalt, or other substrate.
- Confirm that cables and hoses fit completely inside the channels before allowing vehicles to pass.
- Do not exceed the rated 22,000 lb load capacity.
- Inspect the mounting hardware and reflective strips regularly and tighten or replace components when required.
- Check applicable property, road, fire-access, and local installation requirements before mounting.
