Garvee Professional Ultrasonic Cleaner for Parts & Equipment

STATEMENT ABOUT REVIEW.I purchased a similar case that is the EXACT SAME CASE but different outside branding.After looking at the manufacturer and model, I see it's the SAME exact model and manufacturer.THE REVIEW, ENJOY!PERFECT ULTRASONIC CLEANER FOR PRO OR AMATURE CYCLISTS ON A BENCH TOP or TABLE!!!!I want to make an overall statement about ultrasonic cleaning in general:I own various sizes.Everything from 200 ML to a 5 L, and the reason for that is if I'm cleaning my bike, which I have a TREK MADONE, you have all these types of little parts stemming from bolts, bearings, you name it, you can clean it.EVERY ENGINEER DREAM DEVICE TO CLEAN!So, with the 2.5 L, I'll put the more significant parts in there: a cassette, an SRAM crank arm, and a few other more meaningful things. Enve bottle cages, too, and WATER BOTTLES!!!!!For the other smaller ultrasonic cleaners that range from 200 ML to about 2.0 L, each one gives me a different advantage in cleaning smaller items. I don't have to do everything at once and can keep my eye on everything. They're a lot easier (running machines of various sizes) as this gives you some options, but you can go right with the big one. I use the thing for everything. It's sitting on my workbench, where I work on my bike.To speed up the HEATING process, just put a glass of water or a small pot in the microwave or heat it on the stove for 3-5 minutes to boil, and you can offset the heater, which is quick for the ML size with heating.I've used SIMPLE GREEN from concentrate for all the items in the pictures by testing various amounts by small teaspoon; your results will vary. Dial green or blue soap, too, since it breaks down grease great.Just take your time and experience with different cleaning agents.GREEN or BLUE DIAL soap and Simple green work the best.I've cleaned the following:SRAM RED AXS CHAIN (This took a few cycles, but it came out AMAZING with CERAMIC SPEED UFO on it.)Honest, I was SHOCKED at how well it did. BLEW ME AWAY.SPEEDPLAY PEDALS & CLEATS (2 sets were great because I usually chuck them or sell them on eBay for cheap after a few 1000 miles.)TREK THRU AXELS (Front & back from a MADONE fit at once.)2 CRKT KNIVESWATCHSUNGLASSES (RUDY PROJECT)CARABINERSCERAMIC SPEED OSPW BEARINGS, COG, & HOUSING (The ionizing did not come off either; it ran multiple cycles.) I did call CS, and you can clean any bearing with an ultrasonic.SRAM PARTS (Various.)PARK TOOLSNow, you WILL have to run multiple cycles for the chain and other items, but I do the DEEP cleaning first, rinse it out, and use a second or 3rd cycle to finish it.My favorite part is I can clean my chain once a week if I want to, without it being an epic production of cleaning and a long process.Run two cycles for the chain, let it dry, apply the UFO wax, and you are ready.I plug it in next to the sink, run the first cycle, pour it into the sink, and add more water.Repeat the process as often as you like. (I set my Apple watch timer to 7 minutes.)I will test the RED AXS rear and front DEL with the nonelectrical parts out of the container to see how it works; you can clean a rear cassette.This is perfect if you want an ultrasonic machine to live on your tool bench or bike room, have a small apartment, or want something other than a 3-6 LITER machine.We spend a CRAZY amount of $$$$$$$ on our $10,000 + bikes.I no longer have DREAD cleaning a chain, rear cassette, and HIGH-END Cerimi Speed bearings.I now clean my chain and cassette every 10-14 days with different conditions.It's a simple process now.Over the next few weeks, I'll post videos of the process with the bike parts for ideas or get creative with how you position more oversized items for multiple cleanings.If you can THINK of an object to clean, do it.TG

I wasn’t sure what to expect when I took it out of the package. It came straight from China. It was very well packed. Very quick to get up and operating. It was not dented and is actually a very attractive piece. As you can see in the video it’s a little bit on the noisy side but it’s going to be just fine for workshop or garage, great for cleaning small parts. And value for the money. I think this is way better than anything you’re going to find at Harbor freight

Cleaned the carb off my bike and it did a fantastic job getting all the old gunk out of the internals. Exterior almost looks like I bead blasted because it’s so clean. Does a pretty bang up job on Glock parts too. Took 50 year old cosmoline off a yugo sks bolt asssembly. Get a size double what you think you’ll need. That way you have room for anything in the future.

This ultrasonic cleaner is the perfect way to keep your jewelry and valuables clean and maintained. It works very well and is simple to use. It is a good value and is very convenient. The size is big enough for several items, while also being small enough to easily store when not in use. A good investment.

The ultrasonic cleaner is quite impressive overall. It effectively delivers on its advertised functionalities, albeit with a minor caveat. The heated water feature is a standout, offering enhanced cleaning prowess, although it does take a bit of time to reach the desired temperature. Moreover, the inclusion of a timer proves to be incredibly convenient.Its compact size is a definite plus, fitting seamlessly on my countertop while maintaining a satisfactory aesthetic that blends well with modern appliances, thanks to its stainless steel construction.However, the noise level is a notable downside. As anticipated with most ultrasonic cleaners, it operates quite loudly, which might be a drawback for some users despite being a common trait among these devices.In conclusion, this ultrasonic cleaner is a commendable product, delivering on its promises effectively. Its heated water feature, convenient timer, and compact design make it a valuable addition to any household. Yet, the noise level could be a potential concern for those seeking a quieter cleaning solution.